Providing Affordable Housing: Modern methods of construction

Providing Affordable Housing upstart methods of whirlSo c alled forward-looking Methods of wrench grow been put forward as a solution for solving the problem of providing low-priced trapping in sustainable communities for the UK.In a enshroud for senior managers of a study housing development play along propose and on the noseify mod methods of locution to replace traditional plait w ar techniques.There is growing concern in UK that housing is proper more than and more expensive. There atomic number 18 a number of concerns among experts that the construction industry as a whole is underperforming. This has been crossly emphasised in the Egan report (Egan, 1998), where it is alike menti singled that the sign opportunities for improvements in ho usage create exists in the social housing sector. different concern that is really(prenominal) much in the lime light recently is sustainability issues. The atomic number 63an fellowship and UK buzz off agreed of su rroundingsal and talent targets that atomic number 18 precise ambitious.Ho engrosss in UK have traditionally been built in traditional materials much(prenominal) as brick and concrete. The construction material and construction techniques have non changed much in centuries, despite the high level of construction k at present-how that exists in UK. approximately of the modern construction techniques are drop for high-profile prestige grammatical constructions and commercial makes. The housing sector does non seem to have benefited from the modern methods available.This report aims at fanning- proscribed the various modern methods of construction that give the sack benefit the housing sector in many ways. around of these modern methods are already use quite successfully in areas other than housing. The target leave behind be to prove how, by performer of modern construction techniques, affordable and sustainable housing bottom be developed.sustainable ConstructionSust ainability in the main means sustained ability. It means being able for longer. It means being able to benefit from resources for longer, with disclose endangering the depletion of the resources. sustainable construction is an approach to construction that makes optimal use of resources end-to-end the lifespan of a building. This includes the resources utilised for the construction of the building, its operation and living, and its eventual disposal. Resources here relate to sources of material, life force, topographic point and money. Those are the basic requirements for a building.It in addition makes economic sense to use as less resources as workable. So, achieving sustainability should not cost extra to the client, although it may cost extra initially to build the building. A typical building uses many times more resources during its lifespan than during its construction. So globally, it ordain be in the clients interest to go for sustainable methods.Sustainable constr uction (Stern and Knapp, 1993) could also be distinct as those buildings that have minimum uncomely seismic disturbances on the built and natural environment, in foothold of the buildings themselves, their immediate surroundings and the broader regional and global setting. The lucid use of natural resources and appropriate management of the building stock leave contrisolelye to miserliness scarcely resources, reducing cleverness consumption (energy conservation), and improving environmental quality.Environmental ApproachA general outline for environmental conscious protrude (Boontra, 1997) consists of three main stepsReduce the material demand whatsoever(prenominal) client, investor or governmental body should thoroughly evaluate the need for a new building action by investigating the possibilities of reuse and renovating existing buildings. excogitationioners should design a building as efficiently as possible by minimising the amount of resources needed. This un derstructure be do by optimising both the floor excogitate and construction.Application of renewable and recycled sources By application of renewable and recycled sources the life cycle of building materials nookie be closed. Designers should also allow for future recycling. Designing a building for dismantling and not for demolition is one approach.Select materials with the lowest environmental impact The environmental impact of materials is ca utilise during a buildings complete lifetime. Typical environmental issues are raw materials, embodied energy, emissions, hindrance, waste, recycling, repair, lifetime.Throughout the report, it will be demonstrated that the modern methods proposed will resolve positively to the above environmental criteria.Energy ApproachBuildings account for the largest proportion of energy consumption in most western societies. In UK for example, (Nicholls, 2002) energy consumption in buildings account for 45% of the total UK energy consumption. Ener gy is widely produced by burning fossil fuel such as petrol and coal. It is also apply by nuclear fission of Uranium. Both serve upes are very harmful to the environment.Why are Modern Methods Important for a Major Housing Developer?SustainabilityPreviously, sustainability was associated with environmental issues. However, in recent old age it has been recognized that one cannot preserve environment at the expense of socio-economic progress. Sustainability is now being redefined in many circles as a balance ofEconomic stable economic growth and employmentEnvironment protection of environment and prudent use of natural resourcesSocial social progress for everyoneFor these reasons, it is not notwithstanding strategic that construction is clean and energy efficient, but it is also important to consider other factors such as the impact of the construction on its immediate neighbourhood and the society in general. The cost of construction has a flat impact on the cost of the h ousing. It is important to make housing economically viable and affordable without abscission down on our margin.Legal maturations in SustainabilityThere have been several recent legal developments in the area of sustainability that will have a definite future impact on our operations on the UK housing commercialise. Most of these legal developments follow the 1997 Kyoto Earth Summit and are in line with the accepted governments emission and energy targets. The main developments areUK Sustainable Construction Strategy 2000UK Energy White story 2003Sustainable Building Task Group 2003Some of the impacts of these legal developments are already being felt. For instance, lift moody E and Part L of Building Regulations are already being revised and will be more demanding in terms of thermic and acoustic cognitive operation of buildings. There are several judging methods being developed to measure quantify and rate the performance of a building in terms of how sustainable it is, and many of these measure will be taken into account for home seduce permission purposes. unitary of them is the BREEAM rating, developed by the Building Research Establishment. The BREEAM is an environmental assessment for offices, industrial and retail buildings. It consists of a checklist with lots for energy use, transport, water use, pollution, materials, land use etc. It has four ratings pass, good, very good and excellent.Another such assessment method is the Eco-Homes, which is applied to housing sector only and thusly more relevant to us. The Sustainable Building Task Group 2003 has put forward a recommendation for a Code of Sustainable Building, which is based on the BREEAM rating but is simpler. The Code has the full backing of the government and is currently dictatorial for social housing sector. Although it is not compulsory for our market yet, it is more than likely that it will become so in a near future.Another assessment method that may become important in the future is the WRAP, which measures the recycle content of a building. As for now, any building must have a minimum of 10% of recycle content. Most buildings will easily meet that requirement, even those built by the traditional methods. However, it is the intention of the authorities to steadily increase that 10% requirement in the coming years and it will become increasingly difficult to meet by traditional builds. WRAP is critical for planning permission and it is in the long term interest of the company that we start using methods that will enfold higher recycle contents in our housing developments.Health and SafetyHealth and Safety is becoming more and more important for the government and also for private clients. The upcoming CDM regulations 2006 will have major changes that put a lot more responsibility on the clients. Consequently, it can be expected that client will be putting health and safety high in their agenda and will chose their developers and contractors with that in mind.Also the HSE is being more and more demanding about the standard of health and safety and work and checks are done on a regular basis on sites across UK. It is therefore important to be proactive and take a holistic approach towards health and safety. Instead of solely supplying more boots and helmets to site, it will be wiser to adopt methods that are inherently safer.Traditional MethodsTypically, a housing development will either consist of some blocks of flats with parking space or a series of 2 to 3 storey houses, depending on the locality and the client. In both cases, the construction process is the alike, although some differences in scale of operations may occur.SubstructureAfter the planning and survey points, the first step in the construction process is the substructure. The substructure is that part of the building that is below the ground level. Its purpose is to safely transmit all forces to the ground. Traditionally, the substructure will consist of a serie s of pad foundations, strip footings, basements or even piles. Most of the old houses have basements whereas newer houses tend to have strip footings. Taller buildings such as apartments or where the building is on weaker grounds, piles may be postulate. All those foundations are generally formed by digging a hole in the ground and filling it with concrete. The shape, size and depth of the hole depend on the pillow slip of foundation being built. Foundations are labour-intensive and time-consuming work. All of the work has to be done on site, exposed to weather conditions. It also produces large amount of noise and dust during the digging of the ground. Once the trenches or holes are filled with concrete, the site ends up with an excess of soil from the hole.SuperstructureThe superstructure is the visible part of the building, built on the foundation. The structure for houses will consist of building up brick walls from the ground, brick by brick. Each wall will consist of two le aves of brick with a hoo-ha in- betwixt for insulation. The internal floors are generally made of heavy quality joists supporting secondary tincture members and finally a plank topping, all nailed in concert and supported off the brick walls. The brick wall construction will continue until the roof level is reached. At the roof level, a timber roof is built in a way similar to the floor.Recently, concrete columns and beams have been used along with the brick walls. Floors and roofs in newer construction tend to be on concrete, cast in-situ on formwork, supported off the concrete frame members. These methods are very time-consuming and labour intensive and almost all the work has to be done on site.Partitions and FinishesThe internal partitions are either timber frames with ply-wood on each side, or single-leaf brick walls built in the uniform way as the external walls. Stairs are generally of wood.ServicesThe space arouseing, electricity, air-conditioning and ventilation are al l built to suit the building in place.Modern Approach to ConstructionAs opposed to the traditional method where each step of the construction is done independent of each other, the modern methods of construction differ correctly from the approach to the construction process. The thinking process behind the site works is done well in advance, to allow much better coordination between the various trades involved. The planning stage will think of the proposed and future uses of the building. The design stage is the most important stage of construction as decisions taken at the design stage have the highest impact of performance, economy and many other factors.The approach to modern construction is one that takes sustainability and life-cycle cost of a building right from the onset of the design stage. Many factors can be influenced if thought is given at design stage. The hobby chapters will now introduce modern techniques used in construction that will result in more economic and s ustainable construction in the housing sector.Steel Framed BuildingsThe use of brace is not new in construction. It has been used for over a century now. However, its full potentiality has only recently been understood. Steel has the potential to radically change the building and running cost of a building as well as having a major impact on issues such as sustainability, material demand, health and safety and so much more. Developments made over the past decade in firebrand construction have made it the most exciting material for construction.Steels Role in Sustainable DevelopmentSteel is a completely different material from concrete and masonry. It is first of all homogeneous as opposed to a mix and is much stronger. The UK steel construction industry in a very efficient industry and steel can be used to our advantage as a modern construction material for several reasons that will be unveiled below (SCI, 2004).More sustainable DesignGood design is fundamental to sustainable con struction (SCI, 2004). Decisions made at the initial design stage have the greatest effect on the overall sustainability impact of projects. Steels high strength-to-weight ratio is exploited in light structures which have low overall environmental impact and often require fewer and lighter foundations than alternative methods of construction. Its long-span capabilities create flexible spaces that facilitate changes in use during the life of the building, maximising letting potential and reducing refit costs.The energy associated with the occupation of buildings (operations energy) dominates that used in their manufacture and construction (embodied energy) typically by a factor of between 4 and 10 over a 60 year design life. Reducing operational energy consumption reduces environment impact as well as saving money. Steel frames and associated composite or other type of floor slab achieve high levels of fabric energy storage, which can significantly reduce the energy bill for cooling . Steel-based cladding systems for industrial buildings and light steel-framed residential construction provide well-insulated and airtight solutions.More sustainable manufacture and erectionConstruction can have significant social and environmental impacts such as noise, dust, ground and surface water pollution and traffic congestions (SCI, 2004).Steel provides the prospect to maximise off-site construction techniques. Working in a factory under controlled conditions will emphatically result in more accurate products and less waste. It also provides a safer and better working environment for the workers.Computer-sided design and manufacture can be put to best use in steel construction to eliminate defects and reworks and to minimise waste. Any steel waste is generally recovered and recycled. Cost, and therefore time, remain distinguish drivers in construction. Steel construction allows us to build fast and reliably, with minimal time spent on site. The small amount of time spent on site has many impacts such as press down noise, less time for the workers to work as height, less noise and dust, less traffic and the whole community benefits. Less time spent on site also has the advantage of fewer interruptions due to weather, which is a very important factor in the UK, because our weather is world famousAs an example of what can be done (SCI, 2004), the 1600 tonnes of steelwork in the TNT Fastract distribution centre was erected in only 21 old ageSustainability in UseDesigning a building for long life maximises the payback over the initial investment and is also a key aspect of sustainable construction. In that respect, refurbishment of a building to extend its life is very important. The versatility and flexibility of steel permits the owner of the building to easily modify and fit to changing time without having to demolish and rebuild, thus extending the life of the building and getting the most evaluate out of it.Steel is a stable product and if prote cted from the environment with paint, will require little maintenance and will not deteriorate at all with time. Cladding systems associated with steel construction are also easily modified and allow easy access for maintenance.With changing times, the requirements of a building change and therefore modifications may be necessary. Steel is easy to modify and to extend to suite new needs.Sustainability at end-of-lifeA concrete building only has a market value as a built-entity. The material itself can hardly be reused because it is cast-in. and cannot be dismantled. The best use of demolished concrete is land-fill. However, steel buildings have a material value even after(prenominal) construction. Because steel buildings consist of independently prepared members joined together by bolts, these members can be dismantled and re-used if the building is no longer required. For example, when the various Paris market halls built by Baltard in 1854 could no longer satisfy the needs of the city (ECCS, 2002), their function was transferred to Rungis, and the buildings replaced by the Centre Pompidou and the Forum. Recognising the need to preserve important architectural examples from the past one of the market halls was demounted and transferred to Nogent-sur-Marne, where it was simply reconstructed. It now accommodates cultural activities.The fact that a steel building can be demolished and rebuilt using the same structural members has farther-reaching advantages. The immediate advantage that comes to mind is the market value of the building. Of course, a building has a value when it is in use. But with the use of steel, the building will have a value even after its life-span. The steel members can be sold as separate entities or the whole building can be sold to be built on a different site. This contributes enormously to the cost of renovation and therefore can be used to reduce the cost of housing.Looking at the bigger picture, re-using the same material for a ne w building implies that the natural resources that would have been required for the new building have been spared. Finally, even if the steel is not re-used take awayly as a construction material, it can always be recycled for new steel members. Steel is 100% recyclable material.Energy in BuildingsIn buildings, energy is required forSpace heating home(prenominal) het water heatingLightingMechanical ventilation distribute conditioningGeneral electrical services such as lifts and escalatorsThe quantities of each of the above required depart from place to place and from building to building.Space HeatingIn UK as in the rest of Europe, space heating is traditionally achieved by gas-powered or electric powered angry water boilers that distribute the hot water to radiators. The envelope of the building is designed to retain as much of that heat as possible to save on energy. However, there are several innovative techniques now available that are very efficient.New Glazing TechnologyTh ere are new types of glazing that allow the solar heat to go into the building, but not out. Double glazing systems have been used for many years, but now the double-glazing makes use of special glasses. The gap in-between the glasses can be filled with special gases that promote the greenhouse effect. In some cases, simply evacuating the air from the gap works marvellously in acting as a modishness glazing system. There are glasses that can be switched from clear to opaque by the action of current, heat, or naturally like sunglasses. New cladding materials used on the walls are translucent. They transmit light and solar energy but act as insulants.Interactive windows and blending system are computer-controlled to change the level of shading and ventilation at different times of the day to optimise energy use.solar Heating draw a bead on sunlight is used to warm buildings. But solar energy can be used indirectly as well. Solar water heaters are very popular in the Southern Hemisphe re. In Europe and especially in Western Europe, people have the misconception that because of the insensate climate, solar water heaters will not be effective. In fact, solar water heaters are very efficient even in cold regions. It is also very cheap to build or buy one. It can be used on large scale for schools and hospitals with large roof plans. So instead of boiling water in a gas or electric boiler, solar water heaters can be used. Even if in winter the solar water heater cannot produce sufficiently hot water, it can still be used to preheat the water supplied to the boilers.Thermal MassIn many countries, space heating is required at dark more than during the day. In such cases, the wad of the building can be made to heat up during the day by the solar energy methods described above. This trade will absorb this energy during the day but will only start dissipating it after several hours. Concrete floors for example will have a typical time lag of nine hours. Proper use of t his thermal mass can lead to very significant saving in energy. The orientation of the building can exercise a crucial part as well. For example, if the south face is the one that is most exposed to direct sunlight, having more massive walls on the south will improve on the use of thermal mass.Domestic Water HeatingDomestic hot water is used in almost all buildings. Solar water heaters as described previously are generally very effective for domestic hot water. Other methods can also been used, depending on the location. If a village is situated not very far from a volcano, they can usually dig deep boreholes and pump the water to the bottom of the hole where the humans temperature is quite high. They can pump back the water and use it as domestic hot water. The concept is not a new one. Thermal spa and natural hot water baths have been used for centuries.LightingThe orientation of a building can be very important to make use of as much natural light as possible. Smart glazing sys tems discussed before are also very useful and are used more and more now. Lightwells and atria are also more and more used both for its help in natural dismissal and ventilation, but also for its aesthetic contributions. When artificial lighting is required, special low-energy bulbs can be used that give the same amount of light but demand smaller amount of energy.VentilationNatural ventilation has always been used in houses by simply opening and closing windows as required. Commercial buildings have however opted for more high-tech methods such as fans. These can be replaced by careful planning of the openings, of the way the floors are compartmented, and by the use of features such as atria. Also, computer-controlled openings are the high-tech version of manually opening and closing windows as required.Air conditionCooling is always more expensive than heating. Not only does air conditioning consume a lot of energy it also releases CFCs, which are harmful to the ozone layer. Th e use of these can be minimised as well. The use of ventilation can be used to improve the comfort level of occupants. The use of the thermal mass concept can also be used in the same way. The floors are cooled at night using natural ventilation, and during the day, they are used to cool the air inside the building.ConclusionThe aim of the report was to propose and justify modern methods of construction. The report has exposed the necessity to shift to modern methods of construction. It is not just an option worth considering. It will soon be the only option and unless we as a company start the shift now, we will loose a competitive advantage.Among the modern methods mentioned, steel construction comes out to be the flagship of modern, economic and sustainable construction methods. Added to that, other means such as using thermal mass, natural ventilation and natural heating and cooling can be used in crew to wonderful effect.However, the most important point to remember is not the material or any particular technique. It is the approach and the thinking process required to meet the economic needs of the company, satisfy requirements from the government and other authorities and yet be able to produce affordable and high quality and high performance housing for the future.ReferencesEgan, Sir John, Rethinking Construction, Department of Trade and Industry, 1998David Stern and Daniel Knapp, Reuse, Recycling, Refuse and the Local Economy A Case mull over of the Berkeley Serial MRF (documented by Urban Ore, Inc., and The Centre for Neighbourhood Technology October, 1993).Boontra Chiel, Sun at Work in Europe, Vol. 12, No.1, March 1997, p3.Nicholls, Richard, Low Energy Design, Interface Publishing, 2002European Commission for Constructional Steelwork, Merits of Steel, 2002 http//www.szs.ch/merits/vorwort_e.htmlAchieving Sustainable Construction Guidance for clients and their sea captain Advisers, Steel Construction Institute, 2004